EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Photo voltaic Cost Controller is a hugely economical photo voltaic controller designed for off-grid solar techniques. Dependant on multiphase synchronous rectification engineering, it assures optimized Electricity conversion and system stability for a wide range of photovoltaic (PV) applications.
Important Functions on the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence makes use of EPEVER Solar Charge Controller technologies for outstanding solar Vitality harvesting. Crucial functions incorporate:
Multiphase Synchronous Rectification (MSR) for enhanced Electrical power conversion.
Sophisticated MPPT Algorithm with >99% efficiency.
Dual-Phase Charging for Increased battery everyday living.
Liquid crystal display Exhibit with authentic-time facts checking.
A number of Load Management Modes like guide and timer.
Extensive Electronic Protections towards overcharging, more than-discharging, brief circuits, and reverse polarity.
Step-by-Step Guideline to Starting the EPEVER Tracer AN Collection Controller
one. Unboxing and Planning the Controller
Guarantee all elements are included: Tracer AN device, temperature sensor, interaction cables, and consumer guide.
Verify the product selection and voltage scores match your solar panel and battery specs.
2. Mounting the Demand Controller
Pick out a properly-ventilated, dry area close to the battery bank.
Protected the Tracer AN controller utilizing the offered mounting brackets.
Preserve proper clearance for warmth dissipation.
three. Wiring the Photo voltaic Cost Controller
Caution: Always abide by suitable security protocols and ensure the procedure is driven off just before connecting components.
Move one: Join the battery terminals into the cost controller (optimistic to good, negative to detrimental).
Phase 2: Join the solar panel array towards the PV enter terminals.
Phase 3: Join the load terminals if utilizing a direct load link.
Stage 4: Double-Look at all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electricity within the controller by connecting the battery initial.
Utilize the LCD display to navigate the configurations menu.
Configure:
Battery Sort: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Control Modes: Guide, timer, mild Command.
5. Checking and Knowledge Logging
The Tracer AN Series supports real-time checking using the MT50 distant meter.
Details is often logged by way of the RS485 communication port applying software package for example Solar Station Laptop.
Remote checking is feasible While using the EPEVER WiFi module.
six. Troubleshooting Common Difficulties
Problem one: No Electrical power Output
Look at battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Issue 2: Around-Voltage Safety
Validate the solar array’s voltage ranking.
Modify procedure parameters if important.
Challenge three: No Battery Charging
Inspect PV wiring for continuity.
Confirm MPPT settings from the menu.
Benefits of the Tracer AN Sequence with MSR Technology
The multiphase synchronous rectification technological innovation ensures:
Increased Performance: Lowered Electricity losses in the course of conversion.
Increased Reliability: Steady performance beneath variable hundreds.
Lengthier Battery Lifetime: Constant and precise Read more charging profiles.
Summary
The EPEVER Solar Cost Controller with multiphase synchronous rectification technology is undoubtedly an Remarkable choice for optimizing solar power era and lengthening battery lifetime. By pursuing the above setup information, users can make certain utmost efficiency and method longevity.